SKU: TBS-3321-HH
TBS-3321-HH Polished High Helix 8mm STD Deck BB Chevy 250 "BABY" Billet Blower Package 8mm

   250 Mini Blower  for BB Chev std Deck    Polished with Black option  

With new High Helix Billet Rotors

3121  8mm low profile blower TBS 9.8" Deck Height std deck 

BB Chevy- 250 Blower Setup  -  Standard Deck BB  Complete Kit

With 8mm x 2" Wide Belt

Fits under hood  usually with no modifications - overall height of manifold,

 blower and carb adapter is 10.56"

Solid Billet , with HIGH HELIX ROTORS ( see 3121 for the 2 Lobe Version )

Makes  PLENTY of boost for any engine up to 500 cu in -  for Street or

 Marine use or Bracket Racing ( usually 4-8 lbs on 565-580  cu in engines 

Great Street sleeper blower to hide under the hood.  

Requires a Short Water Pump if driving it  ( only because the pulley lines up - not relevant with electric pump )

We also have it available for a tall deck .   TBS-3126-HH  is the part number

*Also Used in High Compression BB Chevy Race cars to add 3-4 lbs of boost to 

equalize Atmospheric conditions when the air gets dirty, and/or  corrected elevation  and density altitude caused a negative impact on  your ET .

A 71 style Supercharger sticking out of the hood is always a nice addition, but it may 

not be what you are looking for. With our 250 Billet-Charger Blower series we have solved that problem. 

Still producing the most boost in the industry these dangerously powerful blowers come

 in a beautifully small package.  Perfect for tight clearances and low profile under-the-hood applications.

Specs:

• Billet Case
  • CNC machined 6061-T6 Aluminum
  • Increased Strength over cast
  • Hard Anodized Interior
  • Mirror-Like Polish
  • Low Profile Design (6.56 tall including Billet Carb Adaptor)
  • Single or Dual Carb (4150 or 4500 *Please Specify when Ordering) SUGGEST  BUFFCO  RISER 
• HIGH HELIX BILLET ROTORS 
  • Teflon OD Stripping
  • Full length rotor shaft for increased strength
  • Maximum boost at low RPM 
• Billet Front Cover -Oil Level Sight Glass
  • Oil Drain Plug -Polished Pressure Relief Valve  - Billet Bearing Plates
• • -  Hard Anodized
• Included:
  • 250 Billet Supercharger with Snout
  • Intake Manifold Tall Deck (4.31" tall, machined for water and Polished)
  • Accessory Pulley 2V belt 
  • Supercharger Pulleys (*Please specify engine size and desired boost when ordering)
  • Belt 8mm x 2"   
  • Idler Assembly-All Necessary Gaskets and Hardware

  Intake bolts are 2" Stainless USS Threads Allen with thick AN Washers