Thumbnail Filmstrip of 3110 SB "Serpentine" Chevy 192 Blower ( Special Order) SB Blower Package - 16 Rib Images
SB Chevy- 192 Blower Setup Special Order - SB Chevy w Serpentine pulley setup ( 8 to 12 week delivery usually )
( See Part # 3115 for 8mm cogged belt design )
Non returnable - High Helix Option
Used for underhood clearance also used on Bracket cars to keep ET consistant in changing weather .
For Street the 3110 is fine for bracket racing, you will want the 3115 8mm style
Race or Street - commonly used on Alcohol high compression Bracket Cars to enhance the atmospheric changes .
Works with gas, E-85 or Methanol
For use with short water pump-
Will make up to 11 lbs boost on a 383 about 10 lbs on a 400 12 lbs on a 350
this setup has a 2V Accessory drive see part # #3111 for serpentine accessory drive
A 71 style Supercharger sticking out of the hood is always a nice addition, but it may not be what you are looking for. With our 192/250 BilletCharger blower series we have solved that problem. Still producing the most boost in the industry these dangerously powerful blowers come in a beautifully small package. Perfect for tight clearances and low profile under-the-hood applications.
Complete Kit for Small Block Chevy
2 Lobe Straight Rotors w/ Teflon ( w 3 Lobe HH Option )
Specs:
-
Billet Case
- CNC machined 6061-T6 Aluminum
- Increased Strength over cast
- Hard Anodized Interior
- Mirror-Like Polish
- Low Profile Design (6.56” tall including Billet Carb Adaptor)
- Single Carb (4150 or 4500 *Please Specify when Ordering)
-
2 Lobe Rotors
- Billet Extrusion
- Teflon OD Stripping
- Full length rotor shaft for increased strength
- Maximum boost at low RPM
-
Billet Front Cover
- Oil Level Sight Glass
- Oil Drain Plug
- Polished Pressure Relief Valve
-
Billet Bearing Plates
- Increased Strength over cast
- Hard Anodized
-
Included:
- 192 Billet Supercharger with Snout
- Accessory Pulley 2V
- Supercharger Pulleys (*Please specify engine size and desired boost when ordering)
- Belt (16 Rib Serpentine style)
- Idler Assembly (Spring Tensioner, Pulley)
- All Necessary Gaskets and Hardware
We stock Innovators West Harmonic Balancers and RCD Blower Hubs
You can choose to run without a balancer since the blower belt absorbs the harmonic vibrations. Some engine Builders however insist on a Balancer, so we like to do what they want. Balancers begin at $495and go up depending on keyway, and if you need crank trigger magnets. Hubs are around $220and up - they are all double keyway.