My Cart: 0 item(s)
MSD 7741
Must be used with CAN-Bus Hub, PN 7740 to complete circuit.
Without the CAN-Bus Terminator in place at the end of the CAN-Bus system, signals could be distorted.
These distorted signals could result in permanent or intermittent problems that include but are not limited to; improper timing, false signals, and repetitious signals.
Always be sure to have the MSD Controller and the CAN-Bus Terminator at the ends of the MSD CAN-Bus.
Features:
- For use with Power Grid Controller
- 4-Connector CAN-Bus Hub required