My Cart: 0 item(s)
Thumbnail Filmstrip of Jones Transmission Cooling System Pump For Circulating & Cooling Transmission Fluid Images
The system has been tested over a four period on a wide variety of racing applications. It has already been deep into the 7 second range at over 180 MPH and run on 3700lb door car propelled in the low 10 second range at over 130MPH.
If you are a racer that enjoys double entering your race car or running multiple classes but are deterred due to the cooling time required for your equipment. The Jones Transmission cooling system is your answer.
Local and traveling pro racers have used this to keep their equipment operating efficiently and consistently under these extreme conditions.
There are no internal modifications required to install the Jones Transmission Cooling system.
It is one of the best bolt on additions that can be made to your racing program.
The Jones Trans Pump utilizes your current transmission pan and transmission cooler to provide the consistent transmission fluid temperature that gives you the winning edge. When the system is activated the fluid is pumped from the bottom of the pan through the cooler and back into the inlet on the transmission case.
This flow of cooled fluid not only cools the fluid in the pan but more importantly cools the internal transmission components.
Kit Contents
***ONLY INCLUDES: Pump with fittings, wiring, realy, on/off switch, red indicator light, and adaptors.
***Must provide your own lines and
fittings.
Installation Notes
Pump can mount in any position.
No internal modifications to transmission or case.
Compatable with Powerglide, TH350, TH400, TF727, TF904 and
C4.
Tools Required
7/16" Drill Bit
1/4" NPT Tap
AN Line Wrenches
_360x360.jpg)
_360x202.jpg)
_256x360.png)
