My Cart: 0 item(s)
Thumbnail Filmstrip of Hilborn 2-3/16" REPAIR Clamp Flange Fits Hilborns with 2-3/16" B Flys, using a 2-1/4" OD Stack Images
Sold Each
2 1/4" Stack uses a 2 3/16" Repair clamp
* You can install over the existing broken one, but you would need to install 4 to make them even .
Replacement flange to repair broken pinch clamp on injector castings.
Cut the top of your manifold off, and drill and tap for this repair camp, fairly easy with a recrip saw.
Specify injector model number when ordering.
Order by Butterfly size which is 1/8 smaller than your Stack OD - So if your stack is 2-1/4" your Butterfly is 2-3/16"
Takes four for an 8 stack injector.
This is for the RAW Power Injector. If you have a Mega Power, should fit also let us know!
*** IF YOU HAVE AN OLDER 4 SCREW STACK SYSTEM - YOU CAN USE THESE TO CREATE A SLIP IN STACK ARRANGEMENT
THE CENTER TO CENTER IS 2.5" AND IF YOU PUT A CAPIPER IN YOUR THROTTLE BORES AND IF IT IS 4.6" OUTSIDE TO OUTSIDE THEN THESE CAN BE DRILLED AND TAPPED INTO YOUR MANIFOLD TO CONVERT IT TO SLIP IN STACKS..... MEASURE CAREFULLY !!!!!
Repair , Stack Repair
